Dimming: From 350 Watt to 3,500 Watt.
	Lamps: Mercury 450 Volt 8 Amp High Frequency.
	Line Voltage: Min. 380 Volt max. 460 Volt, 50/60 Hz.
	Line Current: 9 Amp for 400 Volt line voltage.
	Internal voltage: 750 Volt DC on buffer capacitors.
	Power factor: 0.96 - active sinus current converter.
	DC-ballast: 750 Volt, 10 Amp, 180,000 Hz crystal controlled.
	Output: Square wave pole alternator. steady light ( flicker free ) long lamp life time.
	Crest factor: 1.05
	Starter: Build in starter.
	Weight: 11.4 Kg.
	Dimensions: 95 x 205 x 670 mm.
	Housing: Aluminium profile.
	Cooling: Internal 5 W fan electronic controlled.
	Terminals: 2 x 16 Amp + earth mains inlet.
	2 x 10 Amp + earth lamp outlet.
	25 sub-D for control input and test.
	Operating air temperature: From -10oC to 45oC.
	Filters:  Internal active filter to limit harmonic distortion and multistage filters to limit electromagnetic interference.
	Humidity: 0 to 90% non condensing.
	Fuses: Internal 2 x 12.5 Amp FF on printed board.
	External 10 Amp.
	Inrush current: Limited to operational current.
	Duty cycle mode: Light output can be reduced to 10% within a millisecond when an idle signal is active to save energy and to reduce heat transfer.
	The ballast includes: Power feedback control for light-sensor feedback.